ATOS ScanBox Series 6

High Throughput with Parts up to 3500 mm in Size

ATOS ScanBox Series 6

In production metrology, it is important to identify, analyze and correct quality problems as fast as possible. Many parts are to be checked as completely as possible in order to be able to initiate corrective measures and minimize scrap at short notice and in a targeted manner.

Play Video
 ATOS ScanBox 6135ATOS ScanBox 6235
Dimensions4500 × 4500 × 3250 mm³7665 × 4500 × 3250 mm³
Power supply200–500 V (3-phase, 32 A)200–500 V (3-phase, 32 A)
Max. part sizeØ 3500 mm2× Ø 3500 mm
Max. part weight *5000 kg2× 5000 kg
EntrySafety light curtainSafety light curtain
Opening width2850 mm2850 mm
Floor mounting or fixingRequiredRequired
Loading conceptManual, transport cart, pallet truck, crane, forklift truckManual, transport cart, pallet truck, crane, forklift truck
Sensor compatibilityATOS 5, ATOS 5XATOS 5, ATOS 5X

* in combination with pallet system 2000 kg

ATOS ScanBox Brochure

For further information about the ATOS ScanBox, please download the brochure.


High-speed scanning

The ATOS ScanBox models 6135 and 6235 are equipped with a safety control to be able to oper­ate sensors with laser technology. Combined with the extremely bright light source of the ATOS 5X, both models allow high throughput with high detail resolution at the same time, which is required in car body manufacturing, for example.

Loading and measuring at the same time

The ATOS ScanBox 6235 makes an even higher throughput possible due to two working areas that can be operated inde­pendently from each other. The rotation table can be set up parallel to the measurement. In both working areas or on the rotation tables of the ATOS ScanBox 6235, parts such as doors or trunk lids with a size of up to 3.5 m can be placed. Both working areas are operated safely due to the automatic doors.

Very high load capacity

The ATOS ScanBox models 6135 and 6235 are constructed for large and heavy parts, for example, cast parts, attached parts or tools with a size of up to 3.5 m. The rotation table unit of the coordinate measuring machine carries parts with a weight of up to 5,000 kg. Depending on local conditions, the control tower of the ATOS ScanBox 6135 can be positioned on the left or the right side.

Sensor Technology

ATOS sensors provide full-field 3D coordinates for each individual measurement. Within a few seconds, up to 16 million independent measuring points are captured per scan. As a result, the measuring data is characterized by very high detailed reproduction, thereby enabling very small component features to be measured.

ATOS Professional VMR Software – Virtual Measuring Room (VMR)

The virtual measuring room is the central control station and measurement planning software for all elements of the ATOS measuring cells. It offers the functional representation of a real measurement environment in a virtual simulation. Thanks to the VMR, the user can work with the system without requiring specific robot programming skills. All robot movements are simulated and checked for safety before being performed in the actual environment.

For more information please contact



UCS Tower, plaza # 1, Hill Road Commercial area , phase 6 , Bahria Town, Islamabad Pakistan 

About us

The Pakistans leading 3D Printing Service & Marketplace!